RISA-3D

• Version: 7.1.1
• Release Date: April 25, 2008

 

Upgrading to RISA-3D Version 7.1.1 from an earlier version requires a RUS password for the hardware key. Please contact us at license@risatech.com from more information.

RISAFloor

• Version: 3.2.1
• Release Date: April 25, 2008

Upgrading to RISAFloor Version 3.2.1 from an earlier version requires a RUS password for the hardware key. Please contact us at license@risatech.com from more information.

RISA-2D

• Version: 8.0.3
• Release Date: November 29, 2007

RISA-2D 8.0.3 Standalone Update

File: WebUpdate2D_803_sa.exe (37.2MB)

RISA-2D 8.0.3 Network Update

File: WebUpdate2D_803_net.exe (55.8MB)

Note: Either RISA-2D Version 8.0, Version 8.0.1 OR Version 8.0.2 must be installed on the computer prior to installing this update. To determine the version number you are running please open the program and go to Help/About RISA-2D. For information on upgrading, please email us at info@risatech.com.

RISAFoundation

• Version: 1.1
• Release Date: April 25, 2008

Upgrading to RISAFoundation Version 1.1 from an earlier version requires a RUS password for the hardware key. Please contact us at license@risatech.com from more information.

RISATower

• Version: 5.1.2
• Release Date: March 5, 2008

RISATower 5.1 Standalone Update

Description: An updated RUS code is required to run the program if your current installed version is less than 5.1. You should have received the code as an attachment to your update notification e-mail. Please contact us to request an updated RUS code.
File: WebTW_512_sa.exe (20.7MB)

RISATower 5.1 Network Update

Description: An updated license file is required to run the program if your current installed version is less than 5.1. You should have received the license file as an attachment to your update notification e-mail. Please contact us to request an updated license file.
File: WebTW_512_net.exe (26.7MB)

RISAMasonry

• Version: 1.0.2
• Release Date: December 14, 2006

1.0.2 Update for RISAMasonry Stand Alone

Description: After you download this file to your hard drive, just execute the file and it will update over your RISAMasonry executable.
File: WebUpdateMS_102_sa.exe (3.3MB)

1.0.2 Update for RISAMasonry Network

Description: After you download this file to your hard drive, just execute the file and it will update over your RISAMasonry executable.
File: WebUpdateMS_102_net.exe (5.0MB)

RISAFoot

• Version: 2.0a
• Release Date: May 19, 2004

2.0a Update for RISAFoot Stand Alone

Description: After you download this file to your hard drive, just execute the file and it will update over your RISAFoot executable. Do NOT "Run This Program From It's Current Location". Save it to your hard drive first and then execute it.
File: PatchRF2a.exe (2.7MB)

2.0a Update for RISAFoot Network

Description: After you download this file to your hard drive, just execute the file and it will update over your RISAFoot executable. Do NOT "Run This Program From It's Current Location". Save it to your hard drive first and then execute it.
File: PatchRFN2a.exe (2.7MB)

RISABase

• Version: 1.02a
• Release Date: March 30, 1999

RISABase beta 1.02a

Description: The downloaded file is a self-extracting ZIP file. Copy this file to the directory where you installed the RISABase program, and then execute the downloaded file. The file will unzip a new RISABase executable that will overwrite your existing RISABase executable. If you are asked whether to overwrite the RISABASE.EXE file, you should answer "yes". Any existing base plate models will be unaffected.
File: RB-BETA.exe (320KB)

Detail Report Printing with Contour Plots Ccrossing Page Breaks

Corrected in Version: 1.02a (beta)

Description: If you print the detail report with the bearing or stress contour sections crossing a page break (i.e. the section would start on one page and continue on the next page), you will get several pages printed with only one stress or bearing plot per page. All of the plots will print, it will just use more paper than it needs to.

Work Around: Download and use the 1.02a beta version. You can also choose not to print the stress and bearing plots with the detail report. The stress and bearing sections can also each be printed as their own reports (i.e. deselect all other sections except the bearing or the stress contours).

Errors caused by Duplicate Custom Anchor Bolt Locations

Corrected in Version: 1.02a (beta)

Description: If you use the custom anchor bolt layout and specify two anchor bolts at the same location, you will only get one of the bolts at the specified location and the other bolt will be assigned a location near the bottom right corner of the base plate. The erroneous bolt location will be shown on the base plate plot on the summary report (the coordinates will also reflect the new location).

Work Around: Don't specify the same anchor bolt location for more than one anchor bolt. The 1.02a version will display an error and not solve the base plate model if it detects this condition.

RISASection

• Version: 1.05
• Release Date: December 1, 2005

1.0, Rev 5 Update for RISASection

Description: After you download this file to your hard drive, just execute the file and it will update over your RISASection executable. Do not "Run This Program From It's Current Location". Save it to your hard drive first and then execute it. See the list below for the corrections contained in this update.
File: WebUpdateSE_105_sa_pwd.exe (6.2MB)

Release Notes for the Rev 5 Update

Description: The list of all known issues and enhancements since the 1.0 release in PDF format.
File: NotesRS15.pdf